Maximum ride roleplay Revived
As of 7/28/12, this forum is now open to literate role players with no social life.
New Follow Forum Follow Topic
veevee123

Huawei 3COM Switch SwitchB configuration(1) Create (enter) vlan10:? [SwitchB] vlan10(2) Add E0/1 to vlan10:? [SwitchB-vlan10]portEthernet 0/1(3) Create (Enter) vlan20:? [SwitchB]vlan20(4) Add E0/2 to vlan20:? [SwitchB-vlan20]portEthernet 0/2(5) In practice, the uplink port is generally set to the trunk attribute, allowing vlan to pass it transparently: ? [SwitchB-Ethernet0/3]portlink-type trunkHuawei UA5000 F01D Universal Access Unit For Narrowband(7) All vlans are allowed to transparently pass through E0/3 ports. You can also specify specific vlan values: ? [SwitchB-Ethernet0/3]porttrunk permit vlan allBelkin F9K1002 N300 Wireless Network Router 2.4 GHz【Supplementary Explanation】(1) If a port is a trunk port, the port can belong to multiple vlans;(2) By default, the PVID of the trunk port is 1. You can modify the PVID of the port through the port trunk pvidvlan vlanid command in port mode.Huawei 02359579 Huawei S5720 32X EI 24S AC Managed(3) If the vlanid of the data packet forwarded from the trunk is the same as the PVID of the port, the VLAN information of the packet will be stripped. Please pay attention when configuring the trunk port.(4) If a port is already set as a hybrid port on a switch, it cannot be set as a trunk port.(5) Generally, it is better to specify which specific VLANs the port is allowed to pass through. Do not set to allow all VLANs to pass through.Huawei S5710 108C PWR HI Switch L4 Managed

5/1/2018 #1
Forum Moderators: Little Redwood
Rules:
  • Forums are not to be used to post stories.
  • All forum posts must be suitable for teens.
  • The owner and moderators of this forum are solely responsible for the content posted within this area.
  • All forum abuse must be reported to the moderators.
Membership Length: 2+ years 1 year 6+ months 1 month 2+ weeks new member