If you remain in the position to select which brake pads to mount on your vehicle, you should know that you will find several types in the market.
When we are about to close the purchase of our future vehicle. I think we can rely on our hands the number of individuals who observe what the brake system that equips your vehicle is. It may look like a trivial matter, but if we are not familiar with what is causing our car to decrease, we can be revolted on a number of celebrations. Throughout an emergency braking or when we go to the workshop to change some part of the system braking.
DISC BRAKES AND DRUM BRAKES
To start with, we need to be clear that two braking systems can discover in a car. Starting with the most simple, we will discover the drum brakes, progressively in disuse since in new cars it is hard today to find them other than in the lower ranges. This variety of brakes began to lose prominence as the power of the vehicles increased so that the need for even more efficient braking ended up being vital.
The drum brakes fulfilled their mission up until they were no longer required. It not just for their braking capacity against disc brakes but also for other qualities that relegated them against the previous ones. The bad ability to dissipate heat generated in the braking. Also, the low capability to get rid of the water or the humidity of its interior, which could lead to frightens when being lowered its capacity to recognize inaccurate braking conditions.
The easiest is the solid discs that we will generally discover in smaller sized and lighter cars. In an intermediate action and as a more secondhand procedure are the aerated brake discs. They are not more than 2 discs accompanied die-cut in its body to enhance its cooling. While in an upper action, we will discover a development of the previous ones that have another type of die-cut. It also serves to carry the air and that we will find installed on high-performance vehicles as the king of all carbon-ceramics is found. It planned for large sports due to its components, lightness, and braking capability.
VARIETIES OF BRAKE PADS
As you know, disc brakes make use of pads that brake our vehicle and can make different substances. These pads installed on another part of the braking system called calipers. They push the pads against the disc using their pistons when we step on the brake pedal to stop the car. These pills with the death of the kilometers will lose density, so eventually, we will have the time to go to our workshop to change them.
Usually in the workshop, you go to, they will reinstall the pads marked by the producer. However if you are to choose it by yourself or wish to know what it is that you are setting up, you need to understand that you can discover different types of brake pads in the market. Which will vary in their qualities depending upon the variety of vehicle and our driving:
- Semi-metallic brake pads: These pads characterized by including around 30% and 65% steel wool, copper, or iron powder combined with inorganic fillers. With these pads, you will get in duration and will carry out an efficient heat transfer. It will be particularly efficient in aggressive conductions, or that needs a terrific effort, especially when it warms up, but they will be inefficient in cold conditions.